Finalize Assembly BOM and Prepare Materials Search in Cableteque
Objective
This explains how to move from the Assembly view after AI-assisted BOM creation into a finalized bill of materials that is ready for materials sourcing. It also covers how to edit parts, add missing BOM items or wire specs, and ensure required fields are complete before searching for offers.
Key Steps
1. Open the Assembly view after confirming the import 0:00
After uploading the drawing, creating the BOM, and using AI, proceed to the Assembly view.
Click Confirm and Review All.
Select Import and Finish to open the assembly page.
Verify that the quote name appears at the top and that all assemblies tied to that quote are listed.
2. Review all assemblies within the quote 0:22
Check the list of assemblies associated with the quote.
If the quote contains multiple assemblies, open each one individually.
Finalize the BOM for each assembly before moving on.
Remember that changes made within an assembly apply across the batch sizes shown.
3. Verify required BOM fields are complete 0:58
Confirm that each line item has a part number populated.
Make sure each item also has a quantity and unit of measure.
These fields are required so the system can search for offers correctly.
If any of these fields are missing, complete them before going to the Materials page.
4. Check part recognition and validate part numbers 1:53
Look for the green checkmark indicating the part is recognized in the CableTech Part Library.
If the checkmark is missing, review the part carefully.
Possible reasons include:
A typo in the part number
A customer part number instead of a manufacturer part number
If you are confident the part number is correct, you may leave it as is and continue.
5. Edit existing BOM line items as needed 2:31
To edit a part number, double-click the field and type the correction.
Use the system suggestions if the correct part appears in the dropdown.
To edit quantity or unit of measure, double-click the field, make the change, and click away to save.
Review each line carefully to ensure the BOM is accurate.
6. Add missing parts to the BOM 3:10
Click Add BOM Items to add a new line item.
Start typing the part number and select the correct match.
Enter the quantity and unit of measure.
Click Save when finished.
Use the plus button if you need to add another item before saving.
7. Populate optional fields when helpful 4:00
The Manufacturer field is optional.
Keep it populated if you need a specific manufacturer.
Remove it if you want the system to search more broadly for alternatives.
The Description field is also optional.
Add a description if it helps you identify the part later on the Materials page.
Use these fields to improve clarity, but do not treat them as required.
8. Assign categories when labor tracking is enabled 4:37
Review the Category column if your implementation includes labor tracking.
Ensure each part has the correct category assigned.
Recognized parts may auto-populate the category.
If the category shows as unknown, double-click and select the correct one.
If labor is not being tracked in CableTech, this field can be ignored.
9. Review selected offers after moving to Materials 5:33
Once offers are selected, they will appear in the assembly view.
Expand the offer section to review the selected offer details.
Confirm the offer information matches the intended part.
Note that offer details do not populate until you reach the Materials page.
10. Add generic wire specs when needed 6:09
If a line item should be wire instead of a part number, use the wire identification option.
Click to add a generic wire spec.
Enter the wire specification, such as GXL 14 blue.
Save the wire entry so it becomes part of the BOM.
Cautionary Notes
Do not proceed to the Materials page until the BOM has complete part number, quantity, and unit of measure fields.
A missing green checkmark does not automatically mean the part is invalid, but it should be reviewed carefully.
If you are using labor tracking, failing to assign categories may affect labor calculations.
Manufacturer and description fields are optional, so only keep them populated when they add value.
Changes made in the assembly view affect the batch sizes shown, so verify edits carefully before saving.
Tips for Efficiency
Use the system’s autocomplete suggestions when editing part numbers to reduce typing errors.
Double-click fields to make quick inline edits instead of navigating away.
Add descriptions for hard-to-remember parts so they are easier to identify later on the Materials page.
Remove manufacturer restrictions when you want broader sourcing results.
Finalize each assembly in a multi-assembly quote one at a time to avoid missing items.
Add generic wire specs early if the BOM includes wire that was not captured during AI processing.
